nut slots - Discussion Forums

Once notched - use a thin straight edge from the nut slot leading edge

nut slots - Discussion Forums Quite simple you can't You can't just adjust the gap between your nut and turn your 6 string Strat into a 12 string guitar The nuts and bridge

Once notched - use a thin straight edge from the nut slot leading edge

slot88 Your LP is actually closer to how nuts should be Ideally about half the diameter of the string should sit in the nut slot but since that's

The depth can simply be done with the nut in place and using a 012 feeler gauge or a 12 string as a feeler gauge to measure the gap between

nut slot height Those also work great for checking nut slot depth Hold the ruler up on edge, resting it in the slot and on the frets Look at the gap at the

Sand all 6 sides starting with 80 grit and finishing with 220 grit paper Mark the height of the fret wire to determine slot depth Mark the top edge of the nut