MX960 MIC Port and Interface Numbering

Figure 2, Figure 3, and Figure 4 illustrate the port numbering for the Gigabit Ethernet MIC with SFP installed in the MX960, MX480, and MX240, respectively

MX960 MIC Port and Interface Numbering MX960, as it has two dedicated SCB slots that aren't able to be shared with FPCs Interface Numbering The MX480 is numbered from the bottom up The SCBs are

Figure 2, Figure 3, and Figure 4 illustrate the port numbering for the Gigabit Ethernet MIC with SFP installed in the MX960, MX480, and MX240, respectively

4 slice long slot toaster MX480 MIC Port and Interface Numbering · type —Media type, which identifies the network device For example: · fpc —Slot in which the MPC is installed · pic —

The MX960 can also be powered by two high-capacity AC power supplies The high-capacity power supplies must be installed in adjacent slots in the chassis They

juniper mx960 slot numbering slot is keyed for either an SCB or FPC In the Juniper MX960 interface numbering without SCB redundancy Figure 32

10-Gigabit Ethernet MICs with XFP · fpc: Slot in the router where the MPC is installed · pic: 2-port: 0 or 1 when installed in MIC slot 0; 2 or 3 when installed